Boiler Engineer
Canterbury& Surrounding Area

A standard annual boiler service takes 30 to 45 minutes. The engineer will inspect the boiler internals, check gas pressure and flow rate, carry out a flue gas analysis, and test all safety devices. You will receive a service record which you should keep as proof for your warranty. The engineer should also flag any parts showing early signs of wear.

Yes — most Gas Safe registered boiler engineers also handle radiator repairs, replacements, and balancing. Common radiator issues include cold spots (usually trapped air), leaking valves, and radiators that do not heat up due to sludge buildup. Radiator repairs typically cost £60 to £150, while fitting a new radiator including the unit costs £150 to £350.

Our boiler engineers in Canterbury work on all major brands including Worcester Bosch, Vaillant, Baxi, Ideal, Viessmann, Glow-worm, and Potterton. Many are manufacturer-approved installers, meaning they can offer extended warranties on new installations. If you have a less common boiler brand, let us know and we will match you with an engineer who has experience with your specific model.

A powerflush in Canterbury typically costs between £300 and £600, depending on the number of radiators in your system. This process removes sludge, rust and debris from your central heating, improving efficiency and preventing breakdowns. A powerflush is often recommended before fitting a new boiler to protect the new unit from contamination.

A leaking boiler should always be taken seriously. While a small drip from a pressure relief valve may indicate a minor issue, water leaking from the boiler casing can damage internal electrics and create a safety hazard. Turn off the boiler and the water supply to it, place a container under the leak, and call a Gas Safe registered engineer. Never attempt to repair a boiler leak yourself.

Boiler repairs in Canterbury typically cost between £150 and £400, depending on the fault and the parts required. Common repairs like replacing a faulty diverter valve or fan motor sit at the lower end, while PCB (printed circuit board) replacements can push costs higher. A Gas Safe registered engineer will diagnose the fault and provide a fixed quote before starting any work.